Technical Specs

Technical Specifications

  • Seatpost Diameter (All models): 31.6mm
  • Headset (All Models): Cane Creek 40, Bearing size: 42mm Upper/ 52mm lower
  • Seatpost Collar (All Models): 34.9mm
  • Stock Stem Length: 70mm
  • Front hub spacing (Echo, Flume and Crestone): 150mm x 15mm thru axle
  • Rear hub Spacing (Echo, Flume and Crestone): 197 x 12mm thru axle
  • Crank Spindle Length (1×11 drivetrains): 169mm for Turbine and Next cranks. 167mm for Aeffect Cranks. All cranks have a flipped Chain ring to achieve correct chainline.
  • Stock Crank arm Length: 175mm
  • Q Factor:Next: 203mm, Turbine: 213mm, Aeffect: 205MM

Bottom Bracket/Crank Spacing

  • BB Spacers: 2 on Drive Side, 1 on Non-Drive Side
  • Spindle Spacers: ! IIIOI-BB-IOI (! Marks drive side, I = 1mm spacer, O = 10mm spacer) (driveside crank arm has 3 1mm spacers installed -2 black, 1 red)

Race Face Aeffect 1X11

  • BB Spacers: 2 on Drive Side, 1 on Non-Drive Side
  • Spindle Spacers: 1 Aeffect spacer and crank bolt on Drive Side

RaceFace Turbine Cinch 1X11

  • BB Spacers: 2 on Drive Side, 1 on Non-Drive Side
  • Spindle Spacers: 1 BLK 1mm on each Drive & Non-Drive Side (outside of BB dust seals)
  • Adjust Cinch on Non-Drive Side and tighten set screw

RaceFace Next Cinch 1X11

  • BB Spacers: 2 Drive Side, 1 Non-Drive Side
  • Spindle Spacers: 1 BLK 1mm on each Drive & Non-Drive Side (outside of BB dust seals)
  • Adjust Cinch on Non-Drive Side and tighten set screw